Komatsu — BEVEL GEAR SHAFT, HSS STEERING AND BRAKE (D65EX,PX-12)

014012 Reverse If the steering lever is operated to the right when the machine is traveling in reverse, the action of the selector valve makes HSS motor (28) ro- tate in the opposite direction when traveling forward. That is, the HSS motor rotates clockwise as seen from the left side of the machine. At the same time, gear A (13) on the left side of the machine rotates counterclockwise as seen from the left side of the machine while gear A (13) on the right side of the machine rotates clockwise as seen from the left side of the ma- chine.

When the machine is traveling in reverse, bevel gear shaft (16) and ring gear (22), which is inter- connected with the bevel gear shaft, rotate counterclockwise as seen from the left side of the machine. Therefore, considering the relationship of the rotating speed of the elements in the pairs of planetary gears, the rotating speed of ring gear (22) on the left side is faster (in the reverse direction) than when traveling in a straight line by the amount of the power of HSS motor; on the other hand, the rotating speed of ring gear (22) on the right side is slower than when traveling in a straight line, so the machine turns in reverse to the right, where the output speed is slower.

10-64-8 (21)