3. When steering lever is operated to left 014012 Forward If the steering lever is operated to the left when the machine is traveling forward, HSS motor (28) rotates clockwise as seen from the left side of the machine. At the same time, gear A (13) on the left side of the machine rotates counterclockwise as seen from the left side of the machine, while gear A (13) on the right side of the machine rotates clockwise as seen from the left side of the ma- chine. When the machine is traveling forward, bevel gear shaft (16) and ring gear (22), which is inter- connected with the bevel gear shaft, rotate clock- wise as seen from the left side of the machine.
Therefore, considering the relationship of the rotating speed of the elements in the pairs of planetary gears, the rotating speed of ring gear (22) on the right side is faster than when traveling in a straight line by the amount of the power of HSS motor; on the other hand, the rotating speed of ring gear (22) on the left side is slower than when traveling in a straight line, so the machine turns in forward to the left, where the output speed is slower. 10-64-9 (21)