TROUBLESHOOTING / e-Shovel LIST OF FAULT CODE T5-3-23 Fault Code Details Remedy 14000-2 CAN Communication Error Execute retry B in self-diagnosing. If this error code is displayed after re-try, check the following item. Check the CAN communication line (check the harness). 14001-2 ICF: Flash Memory: Read / Write Error Execute retry B in self-diagnosing and execute the following item. Execute 1.5 Information C/U: Initialize (T5-3-15). 14002-2 ICF: External RAM: Read / Write Error 14003-2 ICF: EEPROM: Sum Check Error Execute retry B in self-diagnosing. If this error code is displayed after re-try, check the following item. 1. Execute 1.10 Control Data: Initialize (T5-3-20). 2.
Execute 1.4 Enter Model and Serial No. (T5-3-14). Then, execute self-diagnosing and execute retry B. 14006-2 ICF: Satellite Communication Terminal: Communication Error Execute retry B in self-diagnosing. If this error code is displayed after re-try, check the following item. Check the communication line. Check the power source line of satellite terminal. Check the fuse. Then, execute self-diagnosing and execute retry B. 14008-2 ICF: Abnormal Internal RAM Execute retry B in self-diagnosing. If this error code is displayed after re-try, replace the controller. 14100-2 Satellite Communication Terminal: Abnormal EEPROM 14101-2 Satellite Communication Terminal:
Abnormal IB/OB Queue 14102-2 Satellite Communication Terminal: Abnormal Local Loup Back Check the communication aerial of satellite terminal. 14103-2 Satellite Communication Terminal: The satellite is not found. 14104-2 Satellite Communication Terminal: Fail 1 of Remote Loup Back Execute retry B in self-diagnosing. If this error code is displayed after re-try, replace the controller. 14105-2 Satellite Communication Terminal: Fail 2 of Remote Loup Back 14106-2 Satellite Communication Terminal: Sending and receiving data are unmatched.