hitachi — Satellite Communication System

TROUBLESHOOTING / e-Shovel SATELLITE COMMUNICATION SYSTEM The satellite communication system is used for maintenance of the machine, “e-Service” by transmitting various data of the machine regularly via a low earth orbit satellite. GPS Aerial Communication Aerial NOTE: Depending on the circumstances of the machine (ex. in the constructions, in the tunnel, affected by the surrounding building and affected of noise), the data transfer rate may become slower, or the communication might not be established. The satellite communication system using a low earth orbit satellite transmits digital data through the radio wave.

If there is excessively noise or use of electrical equipment which causes noise near the machine, they cause reduces data transfer rate or communication might not be established at worst. The satellite communication system consists of satellite communication terminal, GPS aerial and communication aerial. The mail function of monitor unit becomes effective. The functions of each equipment are: Satellite Communication Terminal Receives the data from ICF, GPS aerial and monitor unit, and sends the data to the communication aerial. GPS Aerial Receives location information of the machine from a low earth orbit satellite. Communication Aerial Communicates the data with a low earth orbit satellite.

Monitor Unit Sends the mail when pushing the key corresponding to requirement. 1. General Requirement 2. Fuel Replenishing Requirement 3. Service Maintenance Requirement 4. Forwarding Requirement T1V1-05-07-003 T1V1-05-07-001 Satellite Terminal ICF Monitor Unit Mail Screen 4 3 2 1 T1V5-05-01-037 T5-3-24