hitachi — Fault Code List MC

TROUBLESHOOTING / Troubleshooting A T5-5-13 Symptoms in Machine Operation When Trouble Occurs. Remedy for Dr. ZX Remark In case ATT flow rate is limited, it cannot be limited. Retrial B • Check Harness Actual Operation of Proportional Valve during High Current: • Travel mistakes. • Boom raise operation is slow. • Arm operation is slow. • Swing operation is slow. Retrial B • Check Harness Actual Operation of Proportional Valve during Low Current: • In case ATT flow rate is limited, it cannot be limited. Retrial B • Check Harness Machine overall operation is slow. Retrial B • Check Harness Actual Operation of Proportional Valve during High Current: • The engine is stalled at Low idle speed.

• Engine Speed: Middle to Fast: Engine Stall or Large Lug Down Retrial B • Check Harness Actual Operation of Proportional Valve during Low Current: • Machine overall operation is slow. Retrial B • Check Harness During digging, arm speed is slow. (As deceleration rate is low, this state is not easy to find.) Retrial B • Check Harness Actual Operation of Proportional Valve during High Current: • Combined operation of boom rasie and arm roll-in during lift- ing/precision: The boom raise operation is not smooth. Retrial B • Check Harness Actual Operation of Proportional Valve during Low Current: • During digging, arm speed is slow.

(As deceleration rate is low, this state is not easy to find.) Retrial B • Check Harness Combined operation of boom raise and arm roll-in with the front attachment over ground, the boom is not raised smoothly and the arm roll-in full-speed is slow. Retrial B • Check Harness Actual Operation of Proportional Valve during High Current: • Digging force (arm) becomes weak. Retrial B • Check Harness Actual Operation of Proportional Valve during Low Current: • Combined operation of boom raise and arm roll-in with the front attachment over ground, the boom is not raised smoothly and the arm roll-in full-speed is slow. Retrial B • Check Harness