TROUBLESHOOTING / Troubleshooting A Connector (Harness end of connector viewed from the open side) Disconnect connector MC-C of MC. Check for continuity in harnes between terminal #C2 of harness end of connector MC-C in MC and terminal #2 in travel pilot in pressure sensor. YES Open circuit in harness between MC and travel pilot pressure sensor. YES NO To A Open circuit in harness between MC and travel pilot pressure sensor (terminal #3). Switch travel pilot pres- sure sensor with other pressure sensor and retry. Check if fault code dis- appears. Check if voltage between terminal #1 of harness end of connector in travel pilot pressure sensor and machine is specification. YES · Key switch:
ON NO Open circuit in harness between MC and travel pilot pressure sensor (terminal #1). · Key switch: ON · Specification: More than 0.25 V, Less than 4.75 V NO YES Faulty travel pilot pres- sure sensor. MC Connector MC-C Pilot Pressure Sensor (Travel) YES Faulty MC. #C2 Check if voltage be- tween terminal #C2 of harness end of con- nector MC-D and machine is 0 V. A Shorted circuit in harness between MC and travel pilot pres- sure sensor. · Key switch: ON NO C23 C31 T5-5-83 Disconnect connector of travel pilot pressure sensor. NO Check if voltage between terminals #1 and #3 of harness end of connector is 5±0.5 V. C1 C10 1 2 3