TROUBLESHOOTING / Troubleshooting A MC FAULT CODE 11403 regeneration). · Between terminal #A6 of connector MC-A in MC and terminal #2 of connector in solenoid valve unit (SC) (arm regeneration). Connector (Harness end of connector viewed from the open side) MC Connector MC-A T183-05-04-008 Solenoid Valve Unit (SC) (Arm Regeneration) T1V1-05-04-003 T5-5-88 Fault Code Trouble Cause Influenced Control 11403-2 Abnormal Current Feedback of Solenoid Valve Unit (SC) (Arm Regeneration) Current: Both of Higher than 920 mA or Less than 60 mA Arm Regenerative Control 11403-3 Abnormal Feedback High Current of Solenoid Valve Unit (SC) (Arm Regeneration) Current:
Higher than 920 mA Arm Regenerative Control 11403-4 Abnormal Feedback Low Current of Solenoid Valve Unit (SC) (Arm Regeneration) Current: Less than 56 mA Arm Regenerative Control Switch connectors of YES Faulty solenoid valve unit solenoid valve unit (SC) (SC) (arm regeneration). (arm regeneration) and YES other solenoid valve unit (SF, SG or SI). Check if fault code in Faulty MC. switched solenoid valve NO Check for continuity in unit is displayed. harness between MC and solenoid valve unit (SC) (arm regeneration). · Between terminal #A10 of connector MC-A in MC and terminal #1 of Open circuit in harness. connector in solenoid valve unit (SC) (arm NO Open circuit in harness. NO #A6 #A10