TROUBLESHOOTING / Troubleshooting A MC FAULT CODE 11405 Connector (Harness end of connector viewed from the open side) valve unit (SI) (travel mo- tor fast speed selection). · Between terminal #A5 of connector MC-A in MC and terminal #2 of connector in solenoid valve unit (SI) (travel mo- tor fast speed selection). MC Connector MC-A #A5 T183-05-04-008 #A31 Solenoid Valve Unit (SI) (Travel Motor Fast Speed Selection) T1V1-05-04-003 T5-5-90 Fault Code Trouble Cause Influenced Control 11405-2 Abnormal Current Feedback of Solenoid Valve Unit (SI) (Travel Motor Fast Speed Selection) Current:
Both of Higher than 920 mA or Less than 60 mA Travel Motor Swash Angle Se- lection Control 11405-3 Abnormal Feedback High Current of Solenoid Valve Unit (SI) (Travel Motor Fast Speed Selection) Current: Higher than 920 mA Travel Motor Swash Angle Se- lection Control 11405-4 Abnormal Feedback Low Current of Solenoid Valve Unit (SI) (Travel Motor Fast Speed Selection) Current: Less than 56 mA Travel Motor Swash Angle Se- lection Control Switch connectors of Faulty solenoid valve unit solenoid valve unit (SI) YES (SI) (travel motor fast (travel motor fast speed speed selection). selection) and other YES solenoid valve unit (SF, SC or SG). Faulty MC.
Check if fault code in switched solenoid NO Check for continuity in valve unit is displayed. harness between MC and solenoid valve unit (SI) (travel motor fast speed selection). · Between terminal #A31 of connector MC-A in MC Open circuit in harness. and terminal #1 of connector in solenoid NO Open circuit in harness. NO