TROUBLESHOOTING / Troubleshooting A CAN HARNESS CHECK (MC FAULT CODE 11910, 11914, 11920) • Check the wiring connections first. T5-5-94 Shorted circuit in CAN YES Disconnect all harness between connectors of MC, ground circuit and CAN ICF, ECM and circuit. monitor unit. Check YES for continuity between ground Check for continuity circuit (MC, ICF, between power ECM, monitor unit) circuit (MC, ICF, and CAN circuit. NO Check for continuity in ECM, monitor unit) YES CAN harness · Key switch: OFF and CAN circuit. between MC and · Refer to · Key switch: OFF ECM. “Discontinuity Check · Refer to “Discontinuity between CAN Circuit Check between CAN · Key switch: OFF and Ground Circuit”.
Circuit and Power · Refer to “Continuity Circuit”. Retry by using Dr. ZX. Check in CAN Check if fault code Harness”. Open circuit in CAN 11004-2 is displayed. NO harness between MC and ECM. Normal. NO Shorted circuit in CAN harness between ground circuit and CAN circuit. Normal. NO Check for continuity between power circuit (MC, ICF, NO ECM, monitor unit) and CAN circuit. Check for continuity in CAN harness YES between MC and ECM.