TROUBLESHOOTING / Troubleshooting B Compressor T5-6-148 Compressor does not rotate. Clutch terminal voltage is normal 24 V. Inoperable cooling Clutch terminal voltage is low. system. Clutch terminal voltage is 0 V. Bubbles exist even after refrigerant is refilled. Both high and low side Check for oil and refrigerant leaks from parts other than pressures are compressor and pipe joints by using gas detector. low. Both com- Check for oil and refrigerant leaks from compressor (no pressor and leaks from parts other than compressor) by using gas blower mo- detector. tor rotate. (Refer to NOTE 1, 2 on page T5-6-151.) Stain on exterior. Refrigerant has not been refilled for longer than one season.
Refrigerant is discharged within 1 to 2 months after being recharged. Check for refrigerant leaks using gas detector. Refrigerant is kept charged for longer than 2 years. Compressor cylinder is not hot. (Refrigerant returns to com- High pressure side is pressor in liquid form.) slightly low and low pres- sure side is high. No refrigerant returns in liquid form. High pressure side is low. Bubbles can be seen through Others sight glass. High pressure side is high. Refer to the Cooling Circuit Troubleshooting Table on page T5-6-136. Temperature is not cooled when compressor is operated at fast speed continuously. Air flow from blower is insufficient. Compressor does not rotate.
Clutch terminal voltage is normal 24 V. Inoperable cooling system.