hitachi — Precautions for Inspection and Maintenance

TROUBLESHOOTING / Electrical System Inspection PRECAUTIONS FOR INSPECTION AND MAINTENANCE 1. Disconnect the power source. Remove the harness from the negative terminal side in battery first when taking wire harnesses and connectors off for repair or replacement work. Failure to do so can result in damage to the wire harnesses, fuses and fusible links and, in some cases, cause fire due to short circuiting. 2. Color coding of wire harnesses. As for the color codes of wire harnesses in the electrical system, refer to the table below. In cases on the design sheet where two colors are indicated for one wire, the left initial stands for base color, while the right initial stands for marking color.

NOTE: 1) Code BW indicates a black base wire with white fine-line marking. 2) Initials “O” and “Or” both stand for the color orange. 3) Wires with longitudinal stripes printed on them are not color coded. Do not confuse them with color coded wires. T5-7-1 Code Color Code Color R Red W White L Blue G Green Or Orange Lg Light green Y Yellow B Black Br Brown P Pink Gr Gray V Violet