TROUBLESHOOTING / Electrical System Inspection FUSIBLE LINK INSPECTION Inspection 1. Remove the negative cable from the battery. 2. Loosen bolt M8 holding the cable routed in front of the fusible link box. Slide the cable out of the way of the front cover. 3. Open the front cover of fusible link box and visu- ally inspect the fusible link. Replacement 1. Check that the negative cable is removed from the battery. 2. Remove bolt M8. Remove the fusible link from the battery relay. 3. Open the upper and bottom side covers of fusible link box. Remove screws M6 (2 used). 4. Pull out the fusible link. Replace the fusible link. 5. Install screws M6 (2 used). 6.
Install the fusible link box and the cable to the battery relay. 7. Connect the negative cable to the battery. Battery Relay M178-07-049 Fusible Link Fusible Link Cover T178-05-06-002 Battery Relay Bolt M8 Screw M6 Cable T107-04-05-008 T5-7-5