E EML20010 CHANGING GEAR OIL w Never get under the lower unit while it is tilted, even when the tilt- support lever is locked. Severe injury could occur if the outboard accidentally falls. 1) Put the outboard in a vertical position (not tilted). w Be sure the outboard is securely fastened to the transom or a stable stand. You could be severely injured if the outboard falls on you. 2) Place a suitable container under the gearcase. 3) Remove the oil drain plug. NOTE: The oil drain plug is magnetic. Remove all metal particles from the plug before rein- stalling it. 102015 1 4) Remove the oil level plug to allow the oil to drain completely.
2 1 Oil-level plug 2 Oil drain-plug 601021 c C Inspect the used oil after it has been drained. If the oil is milky, water is get- ting into the gearcase which can cause gear damage. Consult a Yamaha dealer for repair of the lower unit seals. NOTE: For disposal of used oil consult your Yamaha dealer. 4-18