Caterpillar — Caterpillar 99709-68120 — user manual

12 N Service procedure Fitting oil pan Apply sealant A to the mounting surface of oil pan 2 as illustrated. Apply the sealant evenly and without breaks. Within three minutes of applying sealant A , fit oil pan 2 onto the crankcase*. 2 11115 CAUTION Clean the oil pan mounting surface and ensure it is free of oily substances before applying sealant A. Carefully mount oil pan 2 exactly in the correct position. Ensure that sealant A does not spread to other areas. After fitting oil pan 2, wait at least one hour before starting the engine. Reapply sealant A whenever the oil pan mounting bolts have been loosened.

Engine oil temperature sensor Place engine oil temperature sensor 3 in a container of engine oil. Heat the engine oil until it reaches each of the temperatures in the service standards table. At each of the given temperatures, measure the electrical resistance between the engine oil temperature sensor's terminal ➀ and body ➁ . If the resistance values do not match those in the service standards table, replace the engine oil temperature sensor 3 . 3 03868 12-15