OIL PAN, OIL JET, AND OIL LEVEL SENSOR G Disassembly sequence 1 Drain plug 2 Oil pan 3 Engine oil temperature sensor 4 Check valve 5 Oil jet * : Crankcase Gr 11 A: Locating pin : Non-reusable part G Assembly sequence Reverse the order of disassembly. CAUTION Do not tighten check valve 4 in excess of the specified torque. Excessive tightness can cause defective operation, resulting in scorching of the engine. 16775 Tightening torques Unit:
N·m (kgf·m) [lbf·ft] 12-14 Location Parts to be tightened Tightening torque Remarks 1 Drain plug 69 (7) [50.9] – 3 Engine oil temperature sensor 34 ± 6.9 (3.5 ± 0.7) [25.1 ± 5.1] – 4 Check valve 34 (3.5) [25.1] – Sealant Location Points of application Kinds Quantity 2 Crankcase mounting surface of oil pan THREEBOND 1207C As required Service standards Location Maintenance item Standard value Limit Remedy 3 Resistance of engine oil temperature sensor (between terminal ➀ and body) 50°C (122°F) (136 V) – Replace 80°C (176°F) 48 ± 5 V – 100°C (212°F) 27.2 ± 2 V – Figures in parentheses are approximate.