COOLING FAN AND V-BELT G Disassembly sequence 1 V-belt 2 Cooling fan 3 Spacer 4 Water pump pulley * : Water pump assembly P.14-14 G Assembly sequence Reverse the order of disassembly. CAUTION When replacing V-belts 1, be sure to replace them as a set to maintain even tension between them. 16947 Service standards Unit: mm (in.) 14-12 Location Maintenance item Standard value Limit Remedy 1 V-belt tension 10 to 15 (0.394 to 0.591) – Adjust Special tools Location Tool name and shape Part No.
Application 1 Belt Tension Gauge 03612 MH062345 V-belt tension measurement N Service procedure 1 V-belt [Inspection] Apply force of approximately 98 N (10 kgf) [22.0 lbf] to the center of the V-belt 1 and measure the extent of V-belt deflection A. B: Alternator pulley C: Water pump pulley D: Crankshaft pulley 16948