54 54-19 Service standards Location Maintenance item Standard value Limit Remedy 15 Field coil resistance [at 20°C (68°F)] Approx. 6.2 V – Replace Tightening torques Unit: N·m (kgf·m) [lbf·ft] Location Parts to be tightened Tightening torque Remarks 4 Nut (to mount pulley) 132 to 162 (13.5 to 16.5) [97.4 to 119] – N Service procedure 3 Rotor & front bracket assembly [Removal] CAUTION Wind a tape around the spline portion A of the shaft of the rotor & front bracket assembly 3 to prevent damage to the oil seal 18 at the time of removal. 10116 • Insert a plain screwdriver A between the front bracket 12 and stator assembly 14.
• While wrenching the plain screwdriver A, remove the rotor & front bracket assembly 3 from the stator & rear bracket assembly 13. CAUTION If the plain screwdriver A is inserted too far, the coil B of the stator assembly 14 might be damaged and short-circuited. 10701