Caterpillar — Caterpillar 99709-68120 — user manual

ALTERNATOR [Disassembly] CAUTION When the rotor assembly 9 is held in a vice, make sure that the base E of the lugs of the core is held. If the lugs F of the core are held, they will be broken or damaged. 10819 Stator assembly [Removal] Disconnect the leads A and remove the stator assembly 14 from the rectifier 17 . The leads are soldered to the diode leads B of the rectifier. (Three places) 14 CAUTION 02335 De-soldering should be done quickly (in about 5 seconds or less). The diodes will be damaged if heated for a longer time. For installation, reverse the order of removal. [Inspection] (1) Continuity between leads Check to ensure that there is continuity between each lead.

If there is no continuity, the leads are open-circuited. Replace the stator assembly 14 . 02336 (2) Continuity between each lead and core Check to ensure that there is no continuity between each lead and the core. If there is continuity, it means a short circuit. Replace the stator assembly 14 . 02337 54-20