ALTERNATOR G Removal sequence 1 Adjust bolt 2 V-belt 3 Alternator assembly P.54-26 4 Adjust plate * : Alternator bracket 16752 WARNING Before removing the alternator 3, be sure to disconnect the negative terminal of the battery and insulate it with a tape or something else. If the negative terminal is not disconnected, the battery voltage is always available at terminal B and is dangerous. 54-24 G Installation sequence Reverse the order of removal. G Adjustment after installation Adjust the tension of the V-belt 2.
Gr 14 Service standards Location Maintenance item Standard value Limit Remedy 3 Alternator output current (* When hot, when 27V is generated) 1500 rpm 24A or more – Check 2500 rpm 33A or more – 5000 rpm 37A or more – Regulator regulated voltage (5000 rpm, loads 5A or less) 28.5 ± 0.5V – Replace *: “When hot” refers to the state of the engine after 30 minutes of maximum output operation at 5000 rpm at a normal ambient temperature.