54 54-27 Service standards Location Maintenance item Standard value Limit Remedy 14 Field coil resistance [at 20°C (68°F)] 5.8 to 6.6 V – Replace Tightening torques Unit: N·m (kgf·m) [lbf·ft] Location Parts to be tightened Tightening torque Remarks 2 Nut (to mount pulley) 132 to 162 (13.5 to 16.5) [97.4 to 119] – N Service procedure 1 Rotor & front bracket assembly [Removal] • Insert a plain screwdriver A between the front bracket 11 and stator assembly 13. • While wrenching the plain screwdriver A, remove the rotor & front bracket assembly 1 from the stator & rear bracket assembly 12.
CAUTION If the plain screwdriver A is inserted too far, the coil B of the stator assembly 13 might be damaged and short-circuited. 09525 [Disassembly] CAUTION When the rotor assembly 7 is held in a vice, make sure that the base E of the lugs of the core is held. If the lugs D of the core are held, they will be broken or damaged. 02319