Caterpillar — Caterpillar 99709-68120 — user manual

ALTERNATOR Stator assembly [Removal] Disconnect the leads A and remove the stator assembly 13 from the rectifier 16 . The leads are soldered to the diode leads B of the rectifier. (Three places) 13 02335 CAUTION De-soldering should be done quickly (in about 5 seconds or less). The diodes will be damaged if heated for a longer time. For installation, reverse the order of removal. [Inspection] (1) Continuity between leads Check to ensure that there is continuity between each lead. If there is no continuity, the leads are open-circuited. Replace the stator assembly 13 . 02336 (2) Continuity between each lead and core Check to ensure that there is no continuity between each lead and the core.

If there is continuity, it means a short circuit. Replace the stator assembly 13 . 02337 54-28