Caterpillar — Caterpillar 99709-68120 — user manual

11 Special tools Unit: mm (in.) 11-23 Location Tool name and shape Part No. Application 17, 18 A: Caulking Tool Body B: Installer Ring C dimen- sion MH061693 φ51 (φ2.01) MH061694 φ44 (φ1.73) 01951 A: MH061067 B: MH061693 (Inlet) MH061694 (Exhaust) Installing valve seats N Service procedure 2 Valve cotters [Removal] To remove the valve cotter 2, use the Valve Lifter to evenly compress the valve springs 4, 5. [Installation] To install valve cotters, follow the removal instructions in reverse. 01962 CAUTION Do not compress the valve springs 4, 5 more than is necessary. If the valve springs are compressed excessively, the upper retainer 3 can touch the valve stem seal 6 and be damaged.

4 5 Installing outer and inner valve springs Fit the outer and inner valve springs 4, 5 onto the cylinder head 20 with their painted ends downward. A: Painted end 11641 6 Installing valve stem seals • Apply engine oil to the lip A of the valve stem seal 6. • Install the valve stem seal 6 using the Valve Stem Seal Installer. Strike the Valve Stem Seal Installer until it sits snugly on the cylinder head 20. 01964 C dimen- sion MH061693 φ51 (φ2.01) MH061694 φ44 (φ1.73)