CYLINDER HEAD AND VALVE MECHANISM Valves [Inspection] (1) Valve stem outside diameter Replace the valves 7 , 8 if its stem's outside diameter is below specification or severely worn. CAUTION 8 7 Whenever the valves 7, 8 are replaced, be sure to lap the valves and valve seats 17, 18. P.11-25. 01965 (2) Valve seat angle and valve margin Reface or replace the valves 7 , 8 if the valve seat angle or valve margin exceeds the specified limits. A: Valve seat angle B: Valve margin 02264 [Rectification] NOTE Keep grinding to a minimum. If the valve margin is below specification after grinding, replace the valves 7, 8. After grinding, be sure to lap the valves 7,8 and valve seats 17, 18.
P.11-25 01966 Valves and valve guides [Inspection] If any clearance exceeds the specified limit, replace the defective part(s). 16 15 8 7 01967 Valve guides [Removal] 01972 11-24