Caterpillar — Caterpillar 99709-68120 — user manual

PISTONS, CONNECTING RODS, AND CYLINDER LINERS G Pre-disassembly inspection P.11-30 G Removal sequence 1 Bolt 2 Lower connecting rod bearing 3 Connecting rod cap 4 Upper connecting rod bearing 5 Piston and connecting rod assembly P.11-36 6 Cylinder liner * : Oil pan Gr 12 G Installation sequence Reverse the order of removal. 16914 Service standards Unit: mm (in.) 11-28 Location Maintenance item Standard value Limit Remedy – Piston projection 0.85 to 1.06 (0.0335 to 0.0417) – Inspect each location Connecting rod end play 0.15 to 0.45 (0.00591 to 0.0177) 0.6 (0.236) Replace 2, 4 Connecting rod end play Oil clearance [Basic diameter:

65 mm (2.56 in.)] 0.04 to 0.09 (0.00157 to 0.00354) 0.2 (0.00787) Replace Span when free – Less than 69.5 (2.74) 5, 6 Piston and connecting rod assembly-to- cylinder liner clearance [Basic diameter: 118 mm (4.65 in.)] 0.075 to 0.105 (0.00395 to 0.00413) – Replace 6 Cylinder liner Flange projection 0.03 to 0.10 (0.00118 to 0.00394) – Replace Inside diameter φ118 to 118.03 (φ4.646 to 4.647) φ118.25 (φ4.656) Replace Cylindricity 0.03 (0.00118) or less – Replace or grind to oversize