PISTONS, CONNECTING RODS, AND CYLINDER LINERS M N P [Installation] Apply engine oil to the outside surface of the cylinder liner 6 . Insert the cylinder liner into the crankcase and press it into position using the Cylinder Liner Installer. Push down evenly on the entire upper surface of the Cylinder Liner Installer. 1 1A 1B 2A A 2 2B B 3 3A CAUTION 3B 02005 Size marks L are provided on the cylinder liner 6, piston, and crankcase (6 places). When the cylinder liner is replaced, select the proper one according to the size marks on the crankcase and the piston, as shown in the illustration. M : Crankcase size mark N : Cylinder liner size mark P :
Piston size mark The cylinder liners are of a thin design. Handle them with care, and do not subject them to hammer blows or other severe shocks. 02006 02007 11-34