11 11-43 ervice standards Unit: mm (in.) Location Maintenance item Standard value Limit Remedy 4 Flywheel assembly Friction surface distortion 0.05 (0.00197) or less 0.2 (0.00787) Correct or replace Height of friction surface 20 (0.787) 19 (0.748) Replace Friction surface runout (when fitted) – 0.2 (0.00787) Correct or replace 3 Eccentricity of joint – 0.2 (0.00787) Inspect or replace Tightening torques Unit:
N·m (kgf·m) [lbf·ft] Location Parts to be tightened Tightening torque Remarks 8 Flywheel mounting bolt 98 (10) [72.3] + 150° • Wet • Can be reused up to 3 times 9 Plug 88 (9) [64.9] – Oils and sealants Location Points of application Kinds Quantity 2 Bolt threads Engine oil As required 8 Rear oil seal lip Engine oil As required Flywheel mounting surface of rear oil seal Threebond 1207C As required 10 Engine mounting surface of flywheel housing Threebond 1207C As required Special tools Unit: mm (in.) Location Tool name and shape Part No. Application 4 Socket Wrench 01984 MH062354 Fitting flywheel Magnetic Base 00471 MH062356