Caterpillar — Caterpillar 99709-68120 — user manual

11 Flywheel housing [Installation] Apply an even, unbroken bead of sealant A to the crankcase mounting surface of the flywheel housing 10 . Fit the flywheel housing 10 onto the crankcase within 3 minutes of applying the sealant A . 10 CAUTION 11704 Ensure that the sealant application position on the flywheel housing 10 is clean before applying sealant. When fitting the flywheel housing 10, hold it firmly in position to prevent spreading the sealant. After fitting the flywheel housing 10, wait at least an hour before starting the engine. Apply a new bead of sealant A whenever the mounting bolts of the flywheel housing 10 have been loosened.

[Inspection] Rotate the crankshaft and check the extent of eccentricity at the joint A of the flywheel housing 10 . If eccentricity exceeds the specified limit, carry out reassembly. If eccentricity still exceeds the specified limit after reassembly, replace the defective part(s). 02062 11-47