11 11-55 Service standards Unit: mm (in.) Location Maintenance item Standard value Limit Remedy 1 Resistance of engine speed sensor [at 25°C (77°F)] 2.3 ± 0.2 kΩ – Replace 6 Camshaft assembly end play 0.05 to 0.22 (0.00197 to 0.00866) 0.4 (0.0157) Inspect each part 11 Camshaft Cam lift Inlet 6.901 (0.272) 6.40 (0.252) Lobe height: 49.011 (1.930) Base circle diameter: 41.627 (1.659) Exhaust 7.680 (0.302) 7.18 (0.283) Lobe height: 49.307 (1.941) Base circle diameter: 41.627 (1.659) Bend 0.02 (0.000787) or less 0.04 (0.00157) Replace 11, 12 to 15 Camshaft journal-to- camshaft bushing clearance No. 1 journal [Basic diameter:
57.75 mm (2.27 in.)] 0.05 to 0.10 (0.00197 to 0.00394) 0.25 (0.00984) Replace No. 2 journal [Basic diameter: 58.00 mm (2.28 in.)] 0.05 to 0.10 (0.00197 to 0.00394) No. 3 journal [Basic diameter: 58.25 mm (2.29 in.)] 0.13 to 0.18 (0.00512 to 0.00709) No. 4 journal [Basic diameter: 58.50 mm (2.28 in.)] 0.05 to 0.10 (0.00197 to 0.00394) Tightening torques Unit:
N·m (kgf·m) [lbf·ft] Location Parts to be tightened Tightening torque Remarks 1 Engine speed sensor 29 ± 5.9 (3.0 ± 0.6) [21.4 ± 4.4] – 4 Pulse rotor 98 (10) [72.3] – 7 Camshaft gear mounting bolt 175 (18) [129] – Oils and sealants Location Points of application Kinds Quantity 1 Engine speed sensor threads Threebond 1104J As required 5 Crankcase mounting surface of side cover Threebond 1207C As required 11 Camshaft journals Engine oil As required 12 to 15 Inside surfaces of camshaft bushings Engine oil As required