CAMSHAFT Special tools Unit: mm (in.) 11-56 Location Tool name and shape Part No. Application 8 Plug 02082 MF665007 Blanking plug for use when removing camshaft gear Gear Puller 02065 MH061326 Removing camshaft gear 12 to 15 Camshaft Bushing Installer and Extractor A, C dimension B dimension No. 1 φ62.00 (φ2.44) φ57.75 (φ2.27) No. 2 φ62.25 (φ2.45) φ58.00 (φ2.28) No. 3 φ62.50 (φ2.46) φ58.25 (φ2.29) No. 4 φ62.75 (φ2.47) φ58.50 (φ2.30) 02083 MH062025 Removing and installing camshaft bushings N Service procedure G Pre-disassembly inspection Camshaft end play If the end play measurement exceeds the specified limit, replace the defective part(s).
02084 1 Inspecting engine speed sensor • Measure the electrical resistance between terminals ➀ and ➁. • If the measurement is out of specification, replace the speed sensor 1. P.11-55 CAUTION Check the tightening torque of the engine speed sensor 1. If 03674 the sensor is insufficiently tightened, it may not produce signals. A, C dimension B dimension No. 1 φ62.00 (φ2.44) φ57.75 (φ2.27) No. 2 φ62.25 (φ2.45) φ58.00 (φ2.28) No. 3 φ62.50 (φ2.46) φ58.25 (φ2.29) No. 4 φ62.75 (φ2.47) φ58.50 (φ2.30)