Operating the Tractor AutoQuad Plus AutoQuad Plus Transmission — Settings Selecting automatic gear-shifting Press transmission button (A) and select automatic gear-shift (B). Select the forward/reverse ratio LX1037622 —UN—06NOV06 The relationship between forward and reverse gears can be selected on the CommandCenter screen from a maximum of 3 gears higher in reverse to 3 gears lower (+3 to -3). Press transmission button (A) and select the desired relationship in cell (C). The relationship remains in effect when automatic gear shifting is switched off, and is stored after ignition is switched off.
If smart is selected, the electronic system will learn the forward and reverse gear manually selected by the operator and will shift into the relevant gear when changing the direction of travel. LX1037626 —UN—31MAY06 NOTE: When automatic gear shifting is activated, a set maximum gear takes priority over the selected relationship. A—Transmission button B—Cell for setting automatic gear-shifting C—Forward/reverse ratio D—Next page Continued on next page OU12401,0001970 -19-23DEC07-1/3 47-4 030612 PN=102