John Deere OMAL171363 (7430 and 7530) — AutoQuad Plus Transmission — Settings

Operating the Tractor AutoQuad Plus Speed-matching when changing ranges If this option is activated, when changing ranges at travel speeds at or above approx. 7 km/h (4.4 mph), the transmission is automatically shifted into a gear that matches the travel speed. This automatic function can be overridden by holding down one of the gear shift buttons. LX1037622 —UN—06NOV06 Press transmission button (A) and select speed-matching (B). Engine-speed matching when shifting gears If this option is activated, engine speed is altered temporarily by the electronics to achieve a smoother shift. Press transmission button (A) and select engine-speed matching (C) and - if desired - PTO operation (D).

Engine speed can then be matched in the following ways: Switched off all the time, if (C) is not activated Switched on, but off for PTO operation if only (C) is activated Switched on all the time, if (C) and (D) are activated LX1044928 —UN—11DEC07 Initial gear (at start-up) The figure in cell (E) determines which gear will be automatically selected at the transmission immediately after the engine is started. Automatic gear-shifting in reverse A—Transmission button B—Speed-matching C—Engine-speed matching D—PTO operation E—Initial gear (at start-up) F—Automatic gear-shifting in reverse In cell (F), you can select whether or not automatic gear-shifting is active in reverse as well.

Continued on next page OU12401,0001970 -19-23DEC07-2/3 47-5 030612 PN=103