Operating the Tractor AutoPowr Summary of different types of work Procedure Setting for automatic Comment Transport, driving on roads, towed tillage implements (plow, seedbed combination implements etc.) greater than 3-5 Select a setting greater than 3 for economical driving. Front loaders and hydraulically driven machines (silage cutters, feed mixers etc.) 2-4 Select any setting suitable for the work load (light or heavy loads on front loader). To achieve the desired machine speed, the hydraulic system must be able to provide sufficient oil. IMPORTANT:
When applying pesticides and fertilizers, always comply with the guidelines provided by the machine manufacturer and the pesticide/fertilizer producers, and with the relevant legal requirements. OU12401,0001971 -19-25MAY10-4/7 Setting the relationship of forward to reverse speed Press transmission button (A). At the first screen, confirm the next page cell. Then, at the following screen, the desired relationship can be set at cell (B). There are 2 variants: In range 1, reverse speeds can be set to a maximum of 30% higher (selection 1.3) and 70% lower (selection 0.3) than forward speeds.
A setting such as this only takes effect if the maximum speed in a speed range is adjusted using the speed wheel. In range 2 the forward-to-reverse speed ratio is 1:1 up to 22 km/h (14 mph). Above that, it changes automatically to 40:30 or 50:30. If independent is selected, any speed can be set in speed ranges 1 and 2 for each direction of travel. This does not apply to creeper mode. LX1037622 —UN—06NOV06 A—Transmission Button B—Forward/Reverse Relationship C—Next Page LX1037630 —UN—31MAY06 Continued on next page OU12401,0001971 -19-25MAY10-5/7 48-8 030612 PN=112