Hitch Hitch Dampening The tractor is equipped with a hitch dampening function that prevents the tractor from "pitching" when travelling with a raised implement. To activate the dampening function, first move the hitch control lever (with the engine running) to the position that corresponds to the position of the draft links. Then pull it as far as it will go to the rear (beyond ”0”) to the transport position (see arrow). Rate of drop must not be set at the minimum value. LX1037154 —UN—28SEP05 To switch off the dampening function, push the hitch control lever forward from the transport position to a position beyond ”0” (in the "lower" direction). NOTE:
Using the remote control and switching off the engine both have the effect of switching off the hitch dampening function. OU12401,00012D6 -19-25SEP05-1/1 Adjusting Rate of Implement Drop Button (A) is used to select this screen. There, you can set the rate at which mounted implements will drop. The rate-of-drop varies with this setting and the weight of the mounted implement. The heavier the implement, the faster the rate-of-drop and the lighter the implement, the slower the rate-of-drop.
LX1038303 —UN—06NOV06 LX1041102 —UN—06NOV06 OU12401,00014C3 -19-07JUL06-1/1 Rate of Lift Adjustment It is possible to adjust the rate of lift individually at address BCU165 (see ”Customization” in the ”Diagnostic Trouble Codes and Customization” section). OU12401,00013F0 -19-06APR06-1/1 50-4 030612 PN=118