Hitch Depth Adjustment Push down hitch control stop (A) and set the desired working depth. After lifting the implement, the same working depth will be selected the next time the implement is lowered. This depth is indicated by resistance at hitch control lever (B). LX1037160 —UN—28SEP05 A—Hitch control stop B—Hitch control lever LX1037161 —UN—28SEP05 OU12401,00012D8 -19-26SEP05-1/1 Load/Depth Adjustment Button (A) is used to select this screen. There, you can set the hitch between load control and depth control. The positions have the following meanings: 1 = Depth control over 1 but less than 5 = Mixed control 5 = Load control LX1038305 —UN—06NOV06 CAUTION:
Before connecting implements to the three-point hitch, position 1 (depth control) must be selected to prevent unintentional raising or lowering of the hitch. LX1044978 —UN—17MAR08 Continued on next page OU12401,00019F8 -19-23JUN08-1/4 50-5 030612 PN=119