Hitch Float Position In float position (for implements with gauge wheel), implement can move freely up and down to follow ground contours independently of the tractor. To obtain a "floating" action, set load/depth to ”0” and move hitch control lever (A) as far as it will go to the front. LX1037164 —UN—28SEP05 LX1026121 —UN—10MAY01 OU12401,0001465 -19-17JUN06-1/1 Direct Actuation In the event of an electrical failure, the hitch can be actuated as follows: Pull out plug (A). LX1037165 —UN—28SEP05 Run the engine. Take off protective cap (B). From the operator's seat, turn the screw with a 3 mm (0.12 in.) hex. socket wrench until the three-point hitch is in the desired position.
See your John Deere dealer. OU12401,0001942 -19-11DEC07-1/1 Three-Point Hitch The tractors are equipped with quick-coupling (hook-type) draft links. A—Center link B—Lift links C—Cranks for adjusting lift links D—Draft links LX1041463 —UN—15DEC06 OU12401,00015B0 -19-14DEC06-1/1 50-7 030612 PN=121