Hitch Quick-Coupling (Hook-Type) Draft Links These draft links are intended for Category III implement balls. IMPORTANT: The balls must be the correct size. Category Ball diameter (a) LX1033644 —UN—17MAY04 III 64 mm (2.5 in.) OU12401,00015B1 -19-14DEC06-1/6 How to use the coupler hooks The couplers are operated by means of lever (A), which can be actuated either by hand or by a control cable. IMPORTANT: Make certain that the coupler hooks are locked: LX1033638 —UN—17MAY04 Lever (A) must be in contact with the coupler hook, there must be no play noticeable at ball (B), and pin (C) must enclose the ball.
If coupler hooks have a control cable, note how the cable runs after the implement has been attached. If the cable droops excessively or gets tangled in undergrowth or branches, the hooks may be opened by accident. Coupler hook operated by hand A—Lever B—Ball C—Pin LX1033641 —UN—17MAY04 Continued on next page OU12401,00015B1 -19-14DEC06-2/6 Coupler hook operated by means of a control cable 50-8 030612 PN=122