John Deere OMAL171363 (7430 and 7530) — Center Link

Hitch NOTE: On very heavy, compact implements, the lift links can be attached at the rear hole in the draft links. This reduces the lifting height, but maximizes the lifting force. LX1033642 —UN—17MAY04 OU12401,00015B1 -19-14DEC06-6/6 Attach Three-Point Hitch Mounted and Drawn Implements Be sure not to damage exposed parts of cab (see arrows) or other tractor components when attaching three-point hitch mounted or drawn implements. LX1044979 —UN—17MAR08 CAUTION: Do not stand between tractor and implement unless park lock and park brake are both engaged. IMPORTANT:

When attaching three-point hitch mounted or drawn implements for the first time, conduct a trial to ensure that implement will not damage cab or other tractor components in any position. With hitch-mounted implements, pay attention to the highest lift position; with drawn implements, be careful when turning sharply. LX1044978 —UN—17MAR08 Also comply with instructions under Hydraulic Center Link, where applicable. If a swinging drawbar is installed, set it in the front, short position. The swinging drawbar can also be swung to the right or left and secured there. When attaching an implement, first make sure that load/depth control is set to 1.

OU12401,0001CE0 -19-21SEP09-1/1 Leveling the Implement To level implement from side-to-side, adjust one of the lift links. Adjust center link to level front-to-rear. LX,OREGEL004251 -19-01JUL93-1/1 50-10 030612 PN=124