John Deere OMAL171363 (7430 and 7530) — Quick-Coupling (Hook-Type) Center Link

Hitch Center Link Length of center link can be adjusted using adjusting handle (A). Minimum length 587 mm (23.1 in.) Maximum length 782 mm (30.8 in.) LX1036474 —UN—24APR06 Do not deviate from the specified dimensions. Grooves in the thread indicate the maximum permitted setting. The threads must not be unscrewed any further out of the receiver. After adjusting, push handle down again over center link. Insert attaching pin through implement mast and center link, and secure. A—Adjusting handle B—Length OU12401,00015B3 -19-14DEC06-1/1 Quick-Coupling (Hook-Type) Center Link This center link is intended for Category III implement balls. IMPORTANT: The ball must be the correct size.

Category Ball diameter (a) III 60 mm (2.4 in.) LX1033643 —UN—17MAY04 Continued on next page OU12401,00015B4 -19-14DEC06-1/2 50-11 030612 PN=125