John Deere OMAL171363 (7430 and 7530) — Stabilizer Bar (If Equipped)

Hitch Adjust for Vertical Float Depending on the position of the steel plates, draft links can be adjusted to allow for vertical float or to lock out float. A—Vertical float B—No float LX000444 —UN—12AUG94 LX000445 —UN—12AUG94 LX1049780 —UN—23JUL10 LX,OREG 000329 -19-23JUL10-1/1 Sway Blocks (If Equipped) Sway blocks (A) are used to limit sideways motion of draft links during operation and transport. Sway blocks must be fitted when working with attachments which follow exactly the line of the tractor. LX005694 —UN—07AUG95 NOTE: If sideways motion is excessive even with sway blocks installed, additional spacers can be used between the PTO housing and the sway-block mountings.

See your John Deere dealer for suitable spacer rings. If the attachments (plow, disk harrow etc.) require sideways motion in the operating position, remove quick-lock pins (B) and take off the sway blocks. With sway blocks in this position, draft links will sway in operating position. However, sway is locked out in transport position. LX005695 —UN—07AUG95 LX,OREGEL004263 -19-01APR97-1/1 50-16 030612 PN=130