TIA Tractor-Implement Automation Tractor-Implement Automation (TIA) The tractor must be GreenStar™-compliant plus a specific activation is required to be able to use TIA. Contact your John Deere dealer. With TIA certain John Deere approved implements can request and control individual functions of the tractor. Contact your John Deere dealer for more information about TIA-compatible implements. For further information on how to operate TIA, see the separate TIA operator's manual. GreenStar is a trademark of Deere & Company OU12401,0001CCE -19-16NOV09-1/1 Tractor-Implement Automation Safety CAUTION:
The operator of the tractor is responsible for the safe operation of the Tractor-Implement Automation. Tractor-Implement Automation must not be put in operation when driving on public roads or when other persons are close by. OU12401,0001D18 -19-16NOV09-1/1 Operating the Tractor-Implement Automation Assignment of the hot key is described in Section 15, Hot keys - assignment. Actuating this key (confirmation by operator) will allow the implement to control selected tractor functions. LX1048556 —UN—10SEP09 NOTE: An implement may expect that the hot key is actuated several times (e.g.
John Deere baler) OU12401,0001CCF -19-16NOV09-1/1 Requirements for PTO The implement can engage and disengage the PTO. The implement can change the standard speed of the rear PTO (tractor with shiftable PTO). the operator's manual of the implement. Transfer control using the hot key. To withdraw control: Turn PTO switch off. Change standard speed of PTO (prevents future speed changes by the implement). To transfer control to the implement, the following preconditions have to be met: Operator sitting on seat. No malfunctions present in the PTO system. PTO remote control is off. PTO is engaged (PTO switch). NOTE:
When the PTO is controlled by an implement, it can disengage the PTO, change the standard speed and re-engage the PTO. Before transferring control to the implement, perform all necessary steps to prepare the implement as indicated in If the implement is not authorized to engage the PTO when the tractor is stationary, it will be prevented by the tractor. OU12401,0001CD1 -19-15DEC09-1/1 52-1 030612 PN=144