Power Take-Off Front PTO CAUTION: Both front PTO versions operate at a rated speed of 1000 rpm. This applies to the clockwise rotating PTO with 6 splines (A) as well as to the counterclockwise rotating PTO with 21 splines (B). L122873 —UN—02JAN95 NOTE: Direction of rotation of front PTO is seen in relation to the tractor's direction of forward travel. LX,OZAP 000514 -19-01FEB92-1/1 Operating Power Take-Offs CAUTION: Always disengage the PTO when not in use. LX1038319 —UN—27APR06 CAUTION: High-inertia implements do not stop the moment the PTO control lever is shifted to the disengaged position. Do NOT approach the implement while it is coasting down.
Do not work on the implement until it has stopped. NOTE: On tractors with PowrQuad Plus or AutoQuad Plus transmission, the electronic engine-speed matching should be turned off during PTO operation. See Settings for the relevant transmission in the Operating the Tractor section. To switch on the PTO, press switch (A) or (B) down and then forward. To switch off the PTO, pull the switch back. LX1036611 —UN—05OCT05 NOTE: If the engine is switched off and then restarted while the PTO is running, the PTO will not operate. Even so, indicator lights (C) remain on. Switch off PTO and then restart.
On tractors with AutoPowr transmission, an audible alarm warns the operator if he leaves his seat while the PTO is still running. A—Switch for rear PTO B—Switch for front PTO C—Indicator lights LX1038328 —UN—31MAY06 Continued on next page OULXE59,001087C -19-24APR06-1/2 55-3 030612 PN=148