John Deere OMAL171363 (7430 and 7530) — Attaching to Three-Point Hitch (Rear-End Attachment)

Ballast When attaching to a 80 kg (175 lb) basic weight, install a spacer (A) at both inner sides. When attaching to a 110 kg (240 lb) basic weight, spacers are not needed. Insert the hex. socket screws (C) from the inner side and install nuts (B). LX012554 —UN—27JUN96 OULXE59,0010880 -19-16APR06-3/4 If attaching to the three-point hitch, install the center link bracket. Install and secure pin (A). Adjust the depth to which screw (B) is screwed into the center link bracket until the screw is in contact with the pick-up weight, and then counter-lock the screw. The center link bracket has a recess (C) where the spacers can be stored when not in use.

LX014001 —UN—02APR96 When the center link bracket is not in use, it can be folded over and secured to the weight by means of hole (D). OULXE59,0010880 -19-16APR06-4/4 60-4 030612 PN=156