John Deere OMAL171363 (7430 and 7530) — Attaching to Basic Weight

Ballast Attaching to Basic Weight LX1026084 —UN—18MAY01 Suspend the pick-up weight from the draft links of any suitable tractor, and back up the tractor in front of the tractor to which the pick-up weight is to be attached. CAUTION: Select depth control for the hitch of the support tractor. NOTE: Once the pick-up weight has been attached, it is no longer possible to use the conventional additional front weights. The one exception to this is the 180 kg (400 lb) weight pack. CAUTION: Make sure that the hooks on the draft links are engaged properly. IMPORTANT: Front-end installation is authorized only for tractors with front-wheel drive! Lower the pick-up weight onto the basic weight.

Notice how the weight engages. Do NOT disengage the weight from the draft links of the supporting tractor at this stage. First insert and tighten the retaining screw, and refer to the following description. IMPORTANT: Comply with permissible axle loads and tire and wheel rim bearing capacities. See Operator's Manual and manufacturer's notes. CAUTION: Make sure no-one is standing in the danger zone. IMPORTANT: When attaching, do NOT use the center link. CAUTION: On the tractor that is to receive the pick-up weight, engage park brake and park lock. Continued on next page OU12401,0001CE1 -19-21SEP09-1/3 60-6 030612 PN=158