John Deere OMAL171363 (7430 and 7530) — Check Front Wheel Toe-In

Wheels, Tires Use of Dual Wheels (easy-to-attach) Dual wheels may be used on the rear axles of tractors for the purpose of floatation or soil compaction reduction only. either as a field attachment or as an integrated part of a drum design coupling system as Allied Equipment. They are only recommended for use in the field and should be removed prior to driving on public roads. NOTE: Retighten the wheel nuts regularly to the specified torque. See Break-in Period or Service / Every 250 Hours. IMPORTANT:

When installing, wheel disc reinforcements must be fitted These discs are available from your John Deere dealer OULXBER,0001980 -19-03SEP10-1/1 Change Wheels Safely Due to the big size and the heavy weight of tractor wheels, pay attention to the following points when changing wheels: Before changing wheels, place tractor on firm, level ground. Engage park lock and prevent the tractor from rolling away by putting down chock blocks. Remove the ignition key to prevent unauthorized operation. When removing rear wheels, prevent front axle oscillation by using wedges.

When jacking up the tractor, only use the recommended lifting points, see Jack Up the Tractor - Lifting Points in Section 85 of this Operator's Manual. Use a stable jack with sufficient lifting force. See Specifications, Loads and Weights in Section 145. Stop jacking up the tractor when the wheel is completely off the ground. Use a suitable wheel dolly, especially when removing a rear wheel. This is available from your John Deere dealer as special tool KJD10581. Support the tractor when a wheel is removed. Jack stands are available from your John Deere dealer as special tools JT02043 and JT02044.

When installing wheels, make sure that the correct torques are applied, see Tighten Wheel Bolts and Wheel Weights in Section 95 of this Operator's Manual. LX1049987 —UN—15JUL11 KJD10581 - Wheel Dolly LX1049890 —UN—11FEB11 Jack Stand JT02043 or JT02044 CAUTION: Do not operate the tractor until the wheel change has been completed. When changing wheels, make sure that no-one is standing in the danger zone. LX1053310 —UN—23SEP11 When removing a wheel, make sure that the tractor is supported safely. When storing removed wheels, make sure that they cannot fall.

JT02043—Jack Stand, 482 to 736 mm (19 to 29 in.) JT02044—Jack Stand, 863 to 1117 mm (34 to 44 in.) Jack Stand JT02043 or JT02044 OULXBER,0001AA7 -19-13JAN12-1/1 65-1 030612 PN=162