John Deere OMAL171363 (7430 and 7530) — Adjusting the Fixed Fenders

Wheels, Tires Adjusting the Fixed Fenders The fenders may be adjusted individually. Several adjusting positions are possible. Tilt, width and height of the fenders can be adjusted depending on tire size. To do so, proceed as follows: A—Support to base plate (wheel side) B—Support to base plate (tractor side) C—Base plate (tractor side) D—Base plate (wheel side) LX1033634 —UN—08AUG06 OU12401,0001B7F -19-03MAR09-1/4 1. Raise front of tractor so that the front wheel drive axle can pivot freely. 2. Turn steering wheel in both directions and pivot the axle to determine the most suitable fender mounting position. 3. Adjust fender position so that the minimum clearances (see illustration) are met.

There must not be any contact with the tractor frame. LX1031619 —UN—31MAY06 A = 40 mm (1.57 in.), B = 60 mm (2.36 in.) LX1033894 —UN—11MAR04 Continued on next page OU12401,0001B7F -19-03MAR09-2/4 65-4 030612 PN=165