John Deere OMAL171363 (7430 and 7530) — Tire Combinations (up to 50 km/h; 31 mph)

Wheels, Tires Tire Combinations (up to 40 km/h; 25 mph) The size ratio of the front wheels to the rear ones is precisely determined in order to produce a positive front wheel lead of between 1.5 and 4%. Otherwise the tires will become deformed or suffer undue wear. To ascertain the correct ratio when changing tires, proceed as follows: A1 * I1 * I3 * 100 I = A2 * I2 * 102.75 Ascertain tractor data: A1 = Rolling circumference of front tires A2 = Rolling circumference of rear tires 1. Transmission ratio of the differential gear pair. These values are displayed on the product information plate on the l.h. side of the radiator. The following pairs are possible:

I1 = Rear axle ratio (6.40) I2 = Transmission ratio of front axle I3 = Transmission ratio of the differential gear pair Ascertain the gear pair that is appropriate for the overall transmission ratio. Gear pair Transmission ratio 48/10 4,8 Calculated transmission ratio Transmission ratio of the required gear pair 52/10 5,2 (corresponds to a pos. front wheel lead of 1.5 - 4.0%) (corresponds to desired average value of pos. front wheel lead) 2. Transmission ratio of front axle. This figure is displayed on the front axle serial number plate. The following ratios are possible: 13,160 1,676 1,713 1,697 1,714 1,740 1,727 3. Transmission ratio of gear pair for front-wheel drive axle output.

These values are displayed on the product information plate on the l.h. side of the radiator. The following pairs are possible: 1,697 1,727 1,758 1,833 1,875 1,917 1,741 1,779 1,758 1,811 1,854 1,833 1,855 1,895 1,875 Sample calculation 1,896 1,940 1,917 The intention is to fit a tractor with 710/70R38 and 600/65R28 tires, made by a certain manufacturer. 1. The transmission ratio of the differential gear pair is 5.2. Ascertain tire data: 2. The transmission ratio of the front axle is 13.160. 3. The transmission ratio of the gear pair for the front wheel drive axle is 1.875. 1. Select tires with suitable load-bearing capability. 2. Select tires appropriate to the tractor's top speed. 4.

The rolling circumference of the tire on the rear wheel is 5812 mm (228.8 in.). 3. From the manual, ascertain the rolling circumference of the tire desired for the rear wheel. 5. The rolling circumference of the tire on the front wheel is 4398 mm (173.1 in.). 4. From the manual, ascertain the rolling circumference of the tire desired for the front wheel. 6. Calculate the overall transmission ratio. 4398 * 6,4* 5,2 * 100 Ascertain the following data: = 1,862 IMPORTANT: Tires used on the front wheels must have a Speed Radius Index (SRI) of 700 mm (27.6 in.). 5812 * 13,160 * 102,75 Calculate the overall transmission ratio using the following formula:

The gear pair that is required must have a ratio of 1.875. OU12401,0001A79 -19-15SEP08-1/1 65-9 030612 PN=170