John Deere OMAL171363 (7430 and 7530) — Tire Combinations (up to 40 km/h; 25 mph)

Wheels, Tires Tire Pressures Long life and satisfactory performance of the tires depend on proper tire inflation. Under-inflation of tires leads to rapid wear. Over-inflated tires reduce traction and increase wheel slippage. and manufacturer, we recommend that you approach your John Deere dealer or tire company for advice. Since correct tire pressures depend not only on working conditions and load but also on tractor model, tire size AG,OU12401,170 -19-28MAR00-1/1 Service Tires Safely CAUTION: Explosive separation of a tire and rim parts can cause serious injury or death. Do not attempt to mount a tire unless you have the proper equipment and experience to perform the job.

Always maintain the correct tire pressure. Do not inflate the tires above the recommended pressure. Never weld or heat a wheel and tire assembly. The heat can cause an increase in air pressure resulting in a tire explosion. Welding can structurally weaken or deform the wheel. When inflating tires, use a clip-on chuck and extension hose long enough to allow you to stand to one side and NOT in front of or over the tire assembly. Use a safety cage if available. Check wheels for low pressure, cuts, bubbles, damaged rims or missing lug bolts and nuts. TS211 —UN—23AUG88 DX,RIM1 -19-27OCT08-1/1 65-8 030612 PN=169