Wheels, Tires Adjusting Tread on Rear Wheels (Adjustable Rims) IMPORTANT: The distance between the side wall of the tire and the fender must not be less than 50 mm (1.97 in.). LX1047160 —UN—25SEP08 The distance between the running surface (edge) of the tire and the fender must not be less than 60 mm (2.36 in.). Wheel tread can be adjusted by repositioning or reversing the wheel rims. Additional tread widths can be achieved by using spacers. In addition the complete wheel can be installed on the other side of the tractor. In doing so, maintain the direction of tire rotation.
A—500 Nm (370 lb.-ft.) B—210 Nm (155 lb.-ft.) After adjustment has been completed, tighten wheel retaining bolts to specified torque (see Section “Break-In Period”). IMPORTANT: After adjusting wheel tread, retighten all wheel attaching nuts after 4 and 8 hours of operation. Check tightness of these nuts frequently during the next 100 hours of operation. The relationship of the rear wheel disk and rim in obtaining the different tread settings is shown in the following drawings. A study of these drawings before attempting to change tread setting will save time and unnecessary labor.
OU12401,0001AB7 -19-23FEB11-1/1 Tread Widths LX1047159 —UN—22SEP08 Positions of rims, wheel disks and spacers 1 2 3 4 5 6 7 8 9 10 11 12 mm (in.) 1632 (64.3) 1662 (65.4) 1708 (67.2) 1738 (68.4) 1724 (67.9) 1754 (69.1) 1800 (70.9) 1830 (72.0) 1928 (75.9) 1958 (77.1) 2004 (78.9) 2034 (80.1) Tires: 650/65R38 x x x x x x x 710/70R38 x x x x x 20.8R42 x x x x x x x x x x x x 520/85R42 x x x x x x x x x x x x 580/70R42 x x x x x x x x x x 620/70R42 x x x x x x x x x 650/65R42 x x x x x x x NOTE: In certain countries, overall vehicle width for driving on public roads must not exceed 2.55 m (100 in.). OU12401,0001AB8 -19-18SEP08-1/1 65-7 030612 PN=168