Additional Equipment Hydraulic System Levers for Mechanical Selective Control Valves Control lever positions The control lever has four positions. LX1053323 —UN—27OCT11 (A) - Retract The remote cylinder retracts when the lever is moved to the Retract position. (B) - Extend The remote cylinder extends when the lever is moved to the Extend position. (C) - Neutral NOTE: If additional external valves are used, move the control lever to neutral when shutting off each hydraulic function. The remote cylinder is held in place when the lever is in Neutral . (D) - Float The mounted implement follows the ground contours when the lever is in Float position (piston moves freely inside remote cylinder).
OU12401,0001301 -19-03NOV11-1/2 Transport lock With locks (A) each lever for selective control valves can be locked in neutral position (transport lock) or released for all functions. CAUTION: Use locks (A) to lock the control levers when driving on roads and whenever the control levers are in neutral because they are not required. If this is not done, the control levers may be inadvertently actuated while the tractor is in motion, which could lead to serious accidents. LX1053322 —UN—27OCT11 OU12401,0001301 -19-03NOV11-2/2 70-2 030612 PN=173