John Deere OMAL171363 (7430 and 7530) — Maximum Permissible Oil Withdrawal

Additional Equipment Hydraulic System Rate of Cylinder Operation Flow control valves (A) can be used to regulate the rate at which remote cylinders extend and retract (raise and lower). When lowering, make sure that the SCV control lever is NOT moved to float position. LX1037211 —UN—21OCT05 IMPORTANT: Full extension and retraction of a remote cylinder must require more than 1.5 seconds. Faster speeds may cause damage. OU12401,0001CD9 -19-27MAY10-1/1 Couplers CAUTION: The hydraulic system has a maximum system pressure of 20000 kPa (200 bar; 2900 psi). For your own protection and to assure proper functioning of the system, use only genuine John Deere parts.

LX1037212 —UN—21OCT05 Couplers allow hydraulic hoses to be coupled or uncoupled without loss of oil, even if the tractor engine is running. If a malfunction or accident causes the hose to break loose from the coupler, the oil flow through the coupler is stopped immediately. To connect the hose union, press it firmly into the coupler. To disconnect the hose, give it a firm pull. NOTE: When connecting, comply with the symbols on the couplers. OU12401,000130A -19-13OCT05-1/1 Hose Unions The hose unions used must comply with ISO standards. Dimension (A) must be between 23.66 and 23.74 mm (0.931 and 0.934 in.). Dimension (B) must be at least 24 mm (0.945 in.).

LX006613 —UN—15AUG94 LX,OZUSAT004842 -19-02AUG93-1/1 70-12 030612 PN=183